What causes P1443 on a Ford?

Failed canister purge solenoid or valve Blocked, cracked or disconnected EVAP vacuum hoses Faulty purge flow sensor where fitted Stuck charcoal canister check valve Wiring fault in the purge control circuit

How do I fix P1443 on a Ford?

Command the purge valve with a scanner and feel for a click Inspect all EVAP hoses between the canister, valve and intake Test purge flow during a drive cycle with a scan tool Check the purge circuit wiring and connector Replace the purge valve or solenoid after confirming the command signal

P1443 EVAP Canister Purge System/Valve Fault

Q: What does P1443 mean on a Ford?

P1443 — EVAP Canister Purge System/Valve Fault. Applies to Mustang, F-150, Ranger, Taurus, Explorer (1990s–2000s EVAP systems).

Category: Powertrain - Auxiliary Emissions Controls
Severity: Check Engine Light
Applies to: Mustang, F-150, Ranger, Taurus, Explorer (1990s–2000s EVAP systems)

What does P1443 mean on a Ford?

P1443 — EVAP Canister Purge System/Valve Fault. This Ford-enhanced code applies to Mustang, F-150, Ranger, Taurus, Explorer (1990s–2000s EVAP systems).

Common causes of P1443

Failed canister purge solenoid or valve
Blocked, cracked or disconnected EVAP vacuum hoses
Faulty purge flow sensor where fitted
Stuck charcoal canister check valve
Wiring fault in the purge control circuit

How to fix P1443

Command the purge valve with a scanner and feel for a click
Inspect all EVAP hoses between the canister, valve and intake
Test purge flow during a drive cycle with a scan tool
Check the purge circuit wiring and connector
Replace the purge valve or solenoid after confirming the command signal